结合BM3D和多级非线性加权平均中值滤波的遥感影像混合噪声去噪方法     

任超  李现广  邓开元  潘亚龙  朱子林  张志刚  施显健 《测绘通报》2020,(1):89-93

提出了一种基于三维块匹配（BM3D）和多级非线性加权平均中值滤波的遥感影像混合噪声去噪方法，使用coief3小波和sym2小波替换传统三维块匹配算法中的bior1.5和hear参数，将三维块匹配算法和多级非线性加权平均中值滤波相结合以提高算法对混合噪声的去噪能力。进行一个仿真对比试验和一个真实遥感影像去噪试验，试验表明，本文提出的方法在遥感影像混合噪声去噪方面效果要优于传统混合噪声去噪方法。  相似文献   

Research on Parallel Algorithms for uv-faceting Imaging     

《Chinese Astronomy and Astrophysics》2019,43(3):424-443

The uv-faceting imaging is one of the widely used large field of view imaging technologies, and will be adopted for the data processing of the low-frequency array in the first stage of the Square Kilometre Array (SKA1). Due to the scale of the raw data of SKA1 is unprecedentedly large, the efficiency of data processing directly using the original uv-faceting imaging will be very low. Therefore, a uv-faceting imaging algorithm based on the MPI (Message Passing Interface)+OpenMP (Open Multi-Processing) and a uv-faceting imaging algorithm based on the MPI+CUDA (Compute Unified Device Architecture) are proposed. The most time-consuming data reading and gridding in the algorithm are optimized in parallel. The verification results show that the results of the proposed two algorithms are basically consistent with that obtained by the current mainstream data processing software CASA (Common Astronomy Software Applications), which indicates that the proposed two algorithms are basically correct. Further analysis of the accuracy and total running time shows that the MPI+CUDA method is better than the MPI+OpenMP method in both the correctness rate and running speed. The performance test results show that the proposed algorithms are effective and have certain extensibility.  相似文献   

Research on the Methods of Performance Monitoring and Evaluation for Active Hydrogen Maserstwo     

《Chinese Astronomy and Astrophysics》2019,43(2):292-304

Active hydrogen maser is the main frequency standard for establishing and maintaining the time scale. It has the characteristics of high short-term stability and low phase noise. At present, it plays an increasingly important role in the international atomic time (TAI) and various local time scales. Firstly, in combination with the internal state parameters of an active hydrogen maser, the correlation between the internal state parameters and the comparison data of a hydrogen maser is analyzed, and a method for the performance monitoring of a hydrogen maser is proposed. Secondly, according to the characteristics of hydrogen maser performance, a method for evaluating the performance of a hydrogen maser is given. The hydrogen maser performance includes mainly two aspects, namely the frequency stability and predictability. The performances of two types of active hydrogen masers (CH1-75 and MHM-2010) are evaluated by this method. The correlation analysis of the atomic clock state parameters and comparison data shows that the state parameter monitoring can effectively predict the variation of the hydrogen maser performance. The evaluation results of atomic clock frequency stability and predictability show that the atomic clock with a higher medium-and-long term frequency stability has a better predictability. There are two methods for the predictability evaluation, one is based on the data published by BIPM (Bureau International des Poids et Measures), and another one is based on the quadratic model. Both methods are consistent with the weights published by BIPM. Therefore, the two methods can be used as a quantitative method to evaluate the predictability of a hydrogen maser.  相似文献   

Refined chronostratigraphy of the late Mesozoic terrestrial strata in South China and its tectono-stratigraphic evolution     

《Gondwana Research》2019

The late Mesozoic terrestrial strata in numerous basins in S (South) China provide important sedimentary archives to understand the tectonic evolution of S China and East Asia. However, establishing regional stratigraphic framework within a basin and precisely correlating strata among basins remain challenging due to limited chronological constraints. In this study, we report zircon U-Pb ages of 21 samples and a compilation of 132 reliable age data from 15 type sections of the volcanic-sedimentary basins in S China. The synthesized geochronology allows us to establish a refined chronostratigraphy for the late Mesozoic terrestrial strata. New calibrated results indicate that most of the lithostratigraphic units are diachronic, laterally stacking, and/or interfingering. Six stacking styles are classified for the relationship of lithostratigraphic units. Analysis of the refined chronostratigraphy and the stratal stacking styles, together with lithological composition, reveals three episodes of tectono-stratigraphic evolution. Episode I (~145–125 Ma) is characterized by intense volcanism, as evidenced by widespread occurrence of volcanic strata and (137–120 Ma) A-type granites, and was probably related to the rollback of the subducting Paleo-Pacific plate; The strata deposited during Episode II (~125–100 Ma) are composed of variegated sediments associated with/without volcanic intercalations in sedimentary faulted-depression basins, indicating the waning of volcanism and tectonism attributed to the ending of the Izanagi/Kula plate subduction; In Episode III (<~100 Ma), red strata occurred along the NE-SW sinistral strike-slip faulting or failed rifting in small basins, which probably resulted from the drastic directional change of the Paleo-Pacific plate subduction from NW to SN.  相似文献   

复杂地形景区三维导览图的设计与实现     

吴思锴  李百寿  郭家豪  李雪  张卫平 《北京测绘》2020,(1):38-43

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。  相似文献   

PTP协议在广电时间同步网中的应用研究          下载免费PDF全文

权雨  彭良福  何永青 《全球定位系统》2020,45(1):99-104

随着广电行业的飞速发展,以串行数字接口(SDI)基带信号为基础技术架构的传统电视信号已经很难满足未来技术发展和业务扩展的需求．得益于现代通信技术的迅速发展以及即将到来的万物互联的5G时代,广电行业也将采用IP化技术来构建新的网络系统．处在向IP化发展的过渡期,广电IP化目前还存在一些亟待解决的问题．为了解决广电系统网络中需要更高精度的同步信号来完成时间同步的问题,本文利用精确时间协议（PTP）时间同步技术在专用以太网中完成时间同步组网,搭建了测试环境并对测试数据进行了分析．测试结果表明,相较于传统的网络时间协议（NTP）时间同步技术,输出PTP信号的准确度能够达到亚微秒量级,完全满足广电行业IP化数字电视系统时间同步信号的高精度需求．   相似文献   

青藏高原高寒草地植被覆盖度变化及其环境影响因子研究   总被引：1，自引：0，他引：1  

陈建军 《测绘学报》2020,49(4):533-533

青藏高原作为长江、黄河、雅鲁藏布江和恒河等河流的发源地与水源供给地,对中国及周边国家和地区的经济发展、生态平衡有着重要的社会、经济和生态意义。青藏高原在过去几十年里经历了显著的气候变暖,且增温幅度明显高于同纬度其他地区。气候变暖必然导致该地区的多年冻土与生态系统发生显著变化,进而对当地的生态环境、水文过程产生较大影响。为了更深入地认识青藏高原高寒草地的变化过程及其环境影响因子,本研究以野外实测数据、遥感数据、冻土分布数据、土壤水热以及气温降水资料为基础,分析了青藏高原高寒草地植被覆盖度变化的空间分布特征,并进一步探讨了环境因子在其变化过程中的作用,绘制了青藏高原高寒草地植被生长限制因子的空间分布图。  相似文献   

胶东地区招平断裂带南段构造地球化学特征及找矿方向     

李衣鑫 《地质与勘探》2020,56(6):1105-1115

胶东是我国最大的金矿集区，已探明金资源储量5000余吨。招平断裂带是胶东地区重要的控矿断裂，通常将其分为北、中、南三段，其中北段、中段目前都赋存大型-特大型金矿床，而南段仅有几个小型矿床。为揭示该断裂带的关键控矿因素，评估其南段成矿潜力，本文以招平断裂带南段为研究对象，通过元素相关性和聚类分析，确定成矿元素共生组合，进而圈定成矿有利地段。结果显示：Au、Bi、Pb、Ag等元素在绢英岩化碎裂岩、绢英岩化花岗质碎裂岩、碎裂状花岗岩中明显富集；糜棱岩中各元素含量与围岩大致相当，富集不明显。相关性分析和聚类分析显示，Au与Bi、Ag、Hg聚为一类，相关性好，是成矿的指示元素。与北段、中段相比，南段糜棱岩和构造片岩发育，南段由南向北韧性变性作用变弱，而脆性破碎逐渐变强。金矿的形成与脆性碎裂关系密切，韧性变形不利于金矿的形成。研究认为南段的北端、南端成矿条件好，具有较好的找矿潜力，而中部不利于成矿，找矿前景不大。  相似文献   

花岗岩残积土动态冲击性能的SHPB试验研究     

刘新宇  张先伟  岳好真  孔令伟  徐超 《岩土力学》2020,41(6):2001-2008

为研究花岗岩残积土的动态冲击性能，开展了高速冲击下的分离式霍普金森压杆（SHPB）试验，与常规应变率下的试验结果比较，分析了高应变率对花岗岩残积土的应力?应变特性和强度的影响。结果表明：低、高应变率下的花岗岩残积土的?-?a（轴向应力?轴向应变）曲线均呈现出软化型。随着应变率 增加，?-?a曲线向?a增大的方向移动，破坏应变?af增加。但高应变率下?af增加的程度更加明显。花岗岩残积土的峰值强度普遍具有应变率依赖性，二者可用直线关系拟合，但低、高应变率下的拟合关系并不一致。提出了率敏性因子m定量评价依赖性强弱。研究发现，随着应变率的提高，强度的应变率依赖性减弱，低应变率下的m为26.694，而高应变率下仅为0.013。相关试验结果指出，高速冲击荷载对土体总体有害。工程中应该采取合理措施控制冲击荷载的危害。该研究有助于深化花岗岩残积土动态冲击性能的理解，为相关工程的施工与设计提供技术参考。  相似文献   

Status and prospect of 3D inversions in EM geophysics     

Yin  Changchun  Liu  Yunhe  Xiong  Bin 《中国科学:地球科学(英文版)》2020,63(3):452-455

1.Current status Three-dimensional(3D)inversion of geophysical EM data is generally underdetermined,non-linear,and of large-scale that is very difficult to solve by optimization.In the past two decades,with the advancement of computational equipment and numerical algorithms,3D geophysical EM inversion has made great progress.Numerous inversion codes and platforms based on the regularizations have been successfully developed and are being widely used in the industry and scientific research.The development of 3D EM inversions mainly involve the following aspects.  相似文献